Cat6 Pure Copper wire continues to be one of the most popular cables for both residential and commercial applications. It is the successor to Cat5e ethernet cables, and Cat6a ethernet cables have replaced them. Cat6 Bare Copper cable is available in both pure copper and copper-clad aluminum, and it is the ideal choice for maximum pleasure and superior performance.
We’ll talk about the Cat6 Solid Copper 1000ft in this article, and we’ll go through its features to understand how it works. So hang in there with us!
Cat6 Plenum Bare Copper employs RJ45 connections, just as its predecessors. The cable is identified by the “Cat6” wording etched on the insulation sheath. Its upgraded version allows for a data transfer rate of 10Gbps over a distance of 100 meters.
Cat6 plenum pure copper white cable is a category 6 cable with a frequency range of up to 550MHz. Ethernet, Gigabit Ethernet, and Fast Ethernet are among the applications it supports. Inside a plenum-rated jacket, the cable is protected. As the name implies, this cable can be put inside the infrastructure’s plenum areas. This cable is made up of 23 AWG wire with eight pure copper conductors that boost the wire’s conductivity, as well as four unshielded twisted pairs. Cat6 plenum is RoHS compliant and comes with TIA/EIA certification.
This cable has undergone fluke testing to assure its quality and safety. Our 1000ft cat6 plenum comes packaged in an easy-pull box to ensure a hassle-free installation. If you find it to be defective, you can return it using our simple return policy. Our customer service team is available at all times to answer any questions you may have. Order the cable now to take advantage of our low rates and free shipping.
This white Cat6 cable pure copper supports data transfer rates of 10/100/1000 Mbps. Its LAN applications are the product of a 550MHz gestation. 1000BASE-T (IEEE802.3), 10BASE-T, 550MHz Broadband Video Voice, 100BASE-TX Fast Ethernet, ISDN 155/ 622MbpsT1 and 100VG-AnyLAN are among these uses (IEEE802.12). Furthermore, our Cat6 plenum cable supports horizontal networking applications over large distances of up to 100 meters. The cable is plenum rated in addition to being tested for its standards. This indicates that it could be used in plenum environments. Plenum spaces within infrastructure are prone to catching and spreading fire because the air passes through them. Our plenum wires are used in these areas for a variety of reasons, including ventilation, cooling, and heating.
Let’s talk about its primary aspects now that you have basic knowledge.
Cat6 Solid Copper 1000ft Cable
Cross talk is the unwanted effect caused by signal leakage from one cable to another, which can obstruct the transmission of high-quality data. If you’re going to run many cables parallel to each other, you’ll want to keep this in mind. Our Cat6 plenum bare copper cable is extremely effective at reducing cross-talk and other forms of electromagnetic interference.
The data transfer rate of Cat6 Bare Copper cable is 10/100/1000 Mbps, and it has been tested to support up to 550 MHz. As a result, you can utilize this cable for high-speed applications and so on. LAN applications such as 10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3), 100VG-Any LAN (IEEE802.12), 550 MHz Broadband Video Voice, T1, ISDN 155/ 622 Mbps ATM PoE are suited for the cable (Power over Ethernet). This Cat6 Solid Copper also supports horizontal networking applications over distances of up to 100 meters.
Bare Copper Conductors
Are you seeking a high-conductivity, high-performance cabling solution? That’s exactly what you can do with our high-quality Cat6 Solid Copper. This is a category 6 cable that connects you to the internet. Transmission quality, high data transfer speeds, high bandwidth capacity, superior attenuation, and reduced cross-talks are all advantages. The cable has a plenum outer jacket, which is a type of jacket designed specifically for use in plenum environments.
We manufacture Cat6 Pure Copper cable in accordance with the most stringent market and industry requirements, and as a result. The cable has passed TIA/EIA certification and is RoHS compliant. This Cat6 bare copper cable has undergone extensive testing to ensure that it meets all category 6 requirements. It satisfies all of the necessary requirements. Our cable occasionally goes above and beyond some basic criteria and norms. This Cat6 plenum bare copper cable includes a plenum-rated outer jacket and 23 American Wire Gauge AWG solid copper in a pair of four separate color-coded, tightly twisted pairs of solid bare copper (for a total of eight solid conductors).
Cat6 Solid Copper cable has eight conductors because it is made up of four tightly twisted pairs of solid bare copper. We use 100 percent, pure copper, for the conductors in this cable, which improves the overall conductivity of the Cat6 Pure Copper cable. This copper conductor, when combined with thick sheathing and tightly twisted pairs, can significantly reduce crosstalk.
Eight pure copper conductors make up a Cat6 Plenum Bare Copper. To safeguard the signal strength and give better protection against crosstalk and electromagnetic interference, these wires are bundled together in four twisted pairs. Compared to copper-clad aluminum conductors, bare copper conductors have significantly greater insulation and can sustain higher data transfer rates over longer distances.
CMP-rated Jackets
The name simply speaks for itself. CMP-rated jackets are included in the plenum version of Cat6 Solid Copper. This means that these cables are appropriate for use in building plenum zones that are susceptible to fire. The jacket material does not produce smoke or dangerous fumes or elements when exposed to fire. In fact, the jacket’s material serves as a fire retardant, preventing the spread of fire. The jacket is composed of polyvinyl chloride of the highest grade.
Wire Gauge
1000ft Cat6 Solid Copper is made of 23AWG wire. The higher the AWG, the lower the resistance and the stronger the signal.
Length
The signal strength decreases as the length of the cable increases, regardless of the type of cable used. Cat6 pure copper cables, for example, have a data transfer rate of 10Gbps over a distance of 50 meters. As the cable length rises, the signal intensity decreases, and at a length of 100 meters, Cat6 solid copper 1000ft gives a data transfer speed of 1Gbps.
As a result, while purchasing Cat6 Plenum Bare Copper cable, the length factor remains one of the most critical concerns.
Supplier
When you shop online, you have the option of comparing the same Cat6 plenum cable from a variety of vendors. It is preferable to choose the cable that satisfies all industry standards and has outstanding client feedback rather than the cheapest.
Data Transfer Rates and Frequency
Cat6 Plenum Pure Copper supports a data transfer rate of up to 10Gbps and has a bandwidth of 550MHz. The speed of data transit is solely determined by the length. These cables can handle a data transfer rate of 10Gbps over a distance of up to 50 meters, and a data transfer rate of 1Gbps over a distance of up to 100 meters.
Industry Standards
The Cat6 Bare Copper cable complies with all applicable standards, including CSA, CE, FCC, ISO/IES, and RoHS. A good Cat6 cable should also pass the Fluke DXT-1800 Versiv Cable Analyzer test. Cat6 Bare Copper comes in a convenient pull package because it is a bulk cable. Temperatures ranging from 0 to 60 degrees Celsius can be used to attach the cable. It can also withstand temperatures as low as -25 degrees Celsius and as high as 125 degrees Celsius because of its high-quality jacket material.
Exceptional Protection Against Crosstalk
Crosstalk and electromagnetic interference can dramatically impair signal quality, resulting in poor performance. Crosstalk happens when an ethernet cable’s signal bleeds and is confused with another wire’s signal. This reduces the cable’s conductivity and transmission quality. Cat6 Plenum Copper addresses this issue by providing superior protection against crosstalk and undesired interferences such as AXT (alien crosstalk), equal-level distant cross-talk, and near-end crosstalk. It indicates that Cat6 plenum-rated cable minimizes data packet loss significantly.
Fire-retardant
The thick jacket coatings on these cables are fire retardant because they are intended for installation in plenum regions of the building. It means that in the unfortunate event of a fire, these wires will arrest the spread of the fire and generate no harmful chemicals or smoke. Plenum cables can be utilized as an alternative to riser spaces because of these high criteria.
Plenum-rated jackets that are fire retardant, UV, and sunlight resistant are designed to meet stringent fire safety test criteria and are suggested for usage in plenum spaces above suspended/drop ceilings or below elevated floors.
Bulk category 6/Cat6 Plenum 1000 ft Cat6 Solid Plenum CMP is a fire-safe Ethernet cable with bare copper conductors, 4-pair UTP (Unshielded Twisted Pair) up to 250 MHz, and is suitable for usage in both indoor and outdoor business buildings. Cat6 cables include a solid conductor and are designed for longer cable runs. It has enhanced performance, bandwidth, audio/video, broadband, and Solid Cat6 plenum Network Wire is ideal for network installation for business and home use, as well as network adapters, hubs, switches, routers, DSL/Modem, and other high-performance networking applications that require plenum cables.
Uses:
For beginnings, there are eight solid 23 AWG conductors, each twisted into two pairs for a total of four conductor pairs. The cable’s speed is improved as a result of this. Crosstalk is reduced by a pair of independent spines on the cable. This means that this cable can have high transmission performance with minimal signal loss. There’s also a ripcord to make stripping the cable jacket a breeze. This can also give additional network wire protection. Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and other proposed category 6 high-speed, full-duplex, parallel transmission protocols.
Features:
- 4861823172093 UPC
- 1000 feet in length
- CMP, CMR, CMG, CM, and CMX cables are all obsolete.
- AWG 23 (American Wire Gauge)
- UTP 4 pair (Unshielded Twisted Pair)
- Conductors that are solid and pure
- Low Smoke Reel Packing Up to 250MHz RoHS Compliant
- Blue, Grey, and White colors are all available.
