carpet cleaning

There are several misconceptions about carpet cleaning that have persisted over the years, despite the advancement of modern technology. Here we list some of the popular myths with the reasons why they are not applicable today.

Step-1: Wait as long as possible before carpet cleaning because the more you clean it, the faster it will get dirty

This is not true because dirt is abrasive, so every time you step on the carpet, the dirt grinds into the carpet fibers and damages the carpet. A dirty carpet should be replaced before a clean carpet. Vacuuming alone will not keep the carpet free of grease and fine grains that contribute to carpet wear.

Step-2: You only need to clean a carpet when it looks dirty

Not really: you would wash your clothes after wearing them, even if they look clean. The same applies to carpets: the air contains pollen, fungi, bacteria, and air pollution, such as cigarette smoke, car exhaust, and hundreds of other chemicals. Your hair, skin, clothing, and shoes can be transported from outside to end up on your carpet.

Allergies and breathing difficulties can be exacerbated by pollen, fungus, and chemicals in your carpet.

carpet steam cleaning

Step-3: All cleaning methods have the same result

There are two main methods, dry cleaning or hot water removal.

  • Dry cleaning

This is not like dry cleaning because all carpet cleaning methods use water in one form or another, whether using a dry foam, dry chemicals, or dry compound methods).

With dry foam, the carpet is shampooed and allowed to dry, followed by a vacuum cleaner to remove the foam and adhering dirt. This old-fashioned method is less effective and can leave a dirt-attracting residue on the carpet.

The dry chemical method is similar to dry foam, but a rotary machine is equipped with a cloth to rub the carpet to absorb dirt. It’s the equivalent of someone using a stain remover and towel, but on a larger scale. This method also does not achieve a deep cleaning and can also damage the fibers of the carpet.


These dry cleaning methods may be suitable for keeping carpets slightly soiled.

The dry compound method spreads an absorbent compound on the carpet, which is then brushed into the carpet fibers with a machine to soak up the dirt from the mix. When dry, a vacuum cleaner is used to remove the compound, much like the dry foam method, but much more effective at removing dirt and debris. This is known as the dry carpet cleaning system, recommended by more than 70 carpet factories and is the most popular carpet dry cleaning method in Europe.

  • Hot water extraction

A high-pressure hot water cleaning solution is introduced and then extracted from the carpet fibers by a powerful machine. Its deep cleaning action penetrates all fibers completely, drawing nearly all of the moisture pumped into the carpet, along with dirt and debris, for more effective cleaning. The best professional carpet cleaning is often hot water extraction, although it can depend on your preference.


The world’s most extended carpet cleaning wallan corporation recommends hot water extraction. Hot water won’t harm your carpet – that’s another myth! Washing and rinsing carpets in hot water is the most effective way to clean, such as when bathing, washing clothes, or washing dishes.

Step-4: Anyone with the right equipment can do the job

Of course, this is not the case. Training and experience are also important. Many cleaning companies have hot-water cleaners, but some employees have little or no training and even some owner-operators do not know how to use them properly. For this reason, it is important to choose a carpet cleaning service wisely.


Please enter your comment!
Please enter your name here