Never Underestimate The Influence Of Foamex Board While Understanding Methods For Hanging


You’ve probably just received the latest printed Foamex board from your local sign shop or are preparing for the latest one you placed an order on the internet. Making a purchase for a picture is one thing, but finding the ideal place to hang and display your latest artwork or photo is a crucial step.

If you’re thinking of giving up on hanging your portrait on the wall, read on to learn the best ways to display your foam board prints without working up a sweat.

First, What Exactly Does A “Foam Board?” Mean?

Foamex board print has been around since the year 1957. Foam Core, Foam Board foam core board, paper-faced, or paper-faced, is just one of the terms for Foamex according to the location you are in. Foam boards are usually strong and light, making them easier to cut using a sharp craft knife or matt cutter for picture framing.

Foamex board are utilised for mounting photos and prints as well as frames for pictures. If you’re looking to spice your home by incorporating “adult-esque” design Foam boards are a great option for interior design since they can be shaped into various shapes.

Three layers form the solid foam board. A layer of polystyrene or polyurethane foam which is then covered by an outer backing to both sides. White clay coated paper cotton archival or brown Kraft paper.

Many people are familiar with foam boards, but not always by its name. You probably have one on the wall, or perhaps you’ve used it in an event for science or have encountered it among students studying architecture or create models of structures and buildings.

The Basic Characteristics Of A Foam Board

Foam boards are as sturdy as cardboard. They typically range in the range of 3-4mm in thickness approximately one eighth” or 3/16″ respectively. Certain heavy-duty 3mm Foamex designed for specific uses, can be as dense as 10mm or 20mm.

The standard size for foam board measures 22″x 28″ It is typically found in the local arts and crafts retailer or in a supermarket. On the bigger side they can be found in larger sizes like 36″x 48″ as well, but they might be more difficult to locate in local supply stores. Larger sizes of foam boards are readily available at most large-format printing companies.

If you’re searching for foam boards with a large size, approximately 8″ by four” thickness, they could take a while to locate an area store with in stock. These kinds of foam boards are generally ordered. The most likely place to see one is in films. Standard size of movie posters is usually 27″ 40″ is a typical size for poster prints.

Four Options To Put Up Your Print From A Foam Board

Foamboard is among the top alternatives to decorators that are lightweight and easy to use instead of plywood, and virtually any other kind of wood.

Foam board printing isn’t just lightweight however they don’t have any wall preparation However, hanging them can be a bit difficult. Hold on tight to your gorgeous foam board print, because we have you covered. Below are 4 ways to showcase your brand new prints.

  1. Standoffs

Standoffs attach your display to the wall by using a professional-looking and visually appealing 1 inch gap between the sign’s material with the walls.

In contrast to the majority of items used to fix foam boards to walls, standoffs are a part of the design and layout of the final print.

Nickel, chrome, polished and anodized are the various options of finishes available for standoffs in shops.

There are two kinds of standoffs: a through grip as well as an edge-grip. For a through grip style, you’ll need to drill holes in your print on foamboard, whereas the edge grip could leave marks on the print.

Standoffs: How To Utilise Them

First, you’ll need to make sure you measure the size of your sign with your foam board as well as mark your wall so that you are aware of where the screws will be located.

Drill pilot holes into the spots marked with drill bits, the drill bit should be smaller than the diameter of wall screws.

  •         Remove the cap from the barrel.
  •         Install the wall screw through the barrel’s bottom and into the pilot hole.
  •         Place the holes of your sign with the barrels that are on the wall
  •         Then put the caps in the sign and into the barrels to ensure the sign is secured.
  1. 3m Putty

Utilising adhesive glue is the ideal option for mounting items like artwork, paper or site board. It is able to work on both porous and non-porous surfaces as well. It’s very soft to the touch but it is not sticky.

While it doesn’t leave holes in your walls however, it may stain the wall with long-term use. Putty can stick to a wide range of surfaces like brick walls painted and unpainted as well as plastic walls, traditional drywall cement, glass and metal hanging surfaces.

The colder temperatures will require more effort to make it stay in place. The greatest benefit of using putty, is it will not damage the wall.

How Do You Make Use Of A 3m Piece Of Putty:

  •         Take a small amount of putty into your hands and gently knead it.
  •         Then, you can knead until it is warm
  •         Set it up on the wall using a little pressure. That’s it!
  1. Double-Sided Adhesive Strips

To get a permanent, semi-permanent alternative that is stain-free, you can use double-sided adhesive. It’s a clear, non-porous tape coated with a photo-safe adhesive across both surfaces. While this option isn’t permanent, it does hold the image well to the wall and may be difficult to take off in the event of a need.

The tapes are easy to use and are strong, but could remove paint off walls once removed. 

  1. Double-Sided Velcro Tape

Velcro isn’t only for sneakers in your grade 4 Velcro are also great to hang awesome foam board artwork up on your wall. You can purchase a complete length of Velcro and cut it into whatever length you’d like. They are available in different lengths ranging from six feet up to 30 feet. It is possible to make it whatever size you require.

Builders advertising boards hold your image securely to the wall using an adhesive strong enough to the wall, and another for the print. It allows you to remove photos or other artwork off the wall for a closer look. The sticky ends are extremely robust and don’t cause any harm.


Please enter your comment!
Please enter your name here