Level 2 isolation disposable gowns are ideal for low-risk situations, such as drawing blood from a vein, working in a pathology lab or intensive care unit, and do not require a sterile gown. Level 2 isolation disposable gown is tested by pressurizing the materials used to manufacture the gown and exposing the gown to water. These gowns can block more liquids than Level 1 gowns and are effective against liquid penetration from splashes and soaks.  

Different Levels of Disposable Isolation Gowns

When it comes to personal protective equipment or PPE, it’s important to have the right equipment for your situation. A key component of an effective PPE strategy is a level 2 disposable isolation gown designed to prevent cross-contamination and protect the wearer’s skin and clothing from infectious liquids and solids.   

Four Levels of Protection  

Level 2 isolation disposable gowns are referenced by the four levels of protection available. Determining which isolation gown is right for your needs can be a bit confusing. The FDA recognizes the American National Standards Institute/Association for Advancements in Medical Devices (ANSI/AAMI) Guideline PB70:2003, which specifies the tests and results necessary to confirm and verify that a gown provides a specified level of protection. increase.  For simplicity, we have outlined the four standardized levels of protection available based on FDA guidelines. This allows us to know exactly what level we need to keep our workplaces safe for everyone.  

Four Levels of Protection

Level 1  

Protection Level 1 gowns provide minimal protection and typically used in general hospital settings or when medical and medical staff provide only basic care and do not require sterile gowns.  Although these gowns provide a light barrier to liquids, they are not suitable for use in blood draws, intensive care units or pathology laboratories.  

Level 2  

Level 2 isolation disposable gowns are ideal for low-risk situations, such as drawing blood from a vein, working in a pathology lab or intensive care unit, and fluid Resistant own do not require a sterile gown.  These gowns can block more liquid than Level 1 gowns and are effective against liquid penetration that can occur from splashing or immersion.  

Level 3  

Protection Level 3 gowns are ideal for moderate risk scenarios such as arterial blood draws, IV fluid insertions, emergency rooms, or trauma work requiring sterile gowns and equipment.  These gowns are also effective against splashes and submersion. The same tests used for level 2 isolation disposable gowns are used to test the effectiveness of Level 3 gowns long Sleeves disposable gown. 

Level 4  

Level 4 gowns offer the highest level of protection available and used in all high-risk situations (e.g., during surgery in the operating room requiring sterile instruments).  These durable gowns can keep out liquids and viruses for up to an hour.

These gowns tested by exposing them to simulated blood containing the virus. If the gown is free of viruses by the end of the exam, the gown can designated as Level 4. These gowns provide resistance to pathogens, protect against non-airborne diseases. And act as a barrier to large volumes of liquids for extended periods.  

Types of Gowns

Isolation gownsIsolation gowns are protective apparel used to protect the clothing of health care professionals, visitors, and patients from the transfer of microorganisms and body fluids in patient isolation situations.

1) Surgical Gowns

Surgical gowns sterile textile gowns worn by health care professionals who performing activities in a sterile environment.

2) Isolation Gowns

The Canadian government encourages manufacturers to consider the use of fibers/fabrics, recycled and/or sustainable materials within the development of scientific clothing.

Difference Between Isolation Gown and Surgical Gown

A level 2 isolation disposable gowns are used by scientists to prevent exposure to blood, body fluids, and other infectious agents, or to protect patients from infection. Disposable gowns are not suitable for surgery or where severe exposure to body fluids or other hazardous liquids may be predicted.

How to Choose Appropriate Isolation Gowns?  

According to the CDC’s COVID-19 resource, choosing the right level 2 isolation disposable gowns depend on the protection you need for your situation. For patients with suspected or confirmed COVID-19, long Sleeves disposable gown, non-sterile isolation gowns are suitable for patients used for routine medical patient care.

Gowns claiming minimal or low barrier protection (ANSI/AAMI PB70 Level 1 or 2) may used by healthcare workers performing activities with minimal risk of exposure to body fluid.  Isolation gowns with moderate to high barrier protection (ANSI/AAMI PB70 Level 3 or 4) can used in situations where there is moderate to high contamination risk and a large critical area required.   

Adjust the Insulating Gown to Suit the Situation  

Especially during a global pandemic like COVID-19, it is imperative to have a proper PPE strategy in place. Level 2 isolation disposable gowns are essential to protect employees, medical staff, patients, and the community, especially from infectious liquids.

However, while insulating smocks provide essential protection. It can be difficult to know what level of protection you need from your smock. When procuring disposable isolation gowns, choose ANSI/AAMI levels for your situation. Please adjust.  

Level 1 or Level 2 – generally sterile and can used in COVID-19 patients or where exposure to bodily fluids is low risk.  

Level 3 or Level 4 – Normally sterile, for use in medical scenarios where the risk of contamination from bodily fluids is moderate to high.

As more businesses reopen, Community Attire committe to keeping communities and workers safe by equipping everyone to work efficiently and safely.  

Fluid Resistance  

This check assesses the capacity of the mask’s fabric to minimize fluids from visiting from the cloth and coming into touch with the wearer. The better the fluid resistance, the greater the safety  

Level 1 Face Mask International considers the aforementioned performance exams when scoring a mask’s overall performance. There are 3 numerical rankings they assign which can summarized as the following:  

• ASTM Level 1 – Low barrier protection  
• Level 2 – Moderate barrier safety  
• Level 3– Maximum barrier protection 

PPE Coat Features and Benefits   

High-quality medical PPE, including level 2 isolation disposable gowns, has long been a critical requirement in healthcare. Other industries such as oil, gas, and construction also require different types of PPE to ensure safety. PPE long sleeve disposable gown protects both workers and patients or customers from a wide range of hazards, from bloodborne pathogens to respiratory droplets.  

• PSA Coat has several features designed to improve durability and fluid resistance gown. These features will vary depending on the gown at hand, but generally include:   
• Tear resistance and flame retardant  
• Lightweight and breathable material provides a comfortable wearing experience during use  
• Fabric resistant to liquids, alcohol, blood, and static electricity  
• Elastic cuffs for superior security.

These features offer the wearer several distinct advantages.

PPE Gowns Provide 

Protects skin from contact with contaminated surfaces and hazardous materials. Improving the safety and health of staff, employees, patients, and visitors. The comfort and safety of workers working in potentially hazardous environments. Safety for employers who need to maintain safety standards in the workplace. 

Read More