How to Setup Linksys WiFi Extender Using

setup Linksy extender using

To setup Linksys extender using , you need a wifi-compatible device. The address goes into the web browser and thereafter, it takes you to the Linksys login page. You enter the details and login to the device. Once you login, things become easy. You can easily configure your Linksys wifi extender using the default web address

Setting up the Linksys wifi extender allows you to configure your Linksys extender with the router’s network. Once the device sets up, you can install it anywhere to experience the extended network. The wifi extender picks up the signals from your router and repeats them in order to eliminate all the dead zones from your home or office. 

Today, we will discuss how to setup Linksys extender using the default web address. We will also discuss various issues that may arise while you attempt to configure your device. 

Setup Linksys extender via

Setting up your Linksys extender using the web interface allows you to configure all the settings and features as per your requirements. You get a lot of options to choose from and a lot of features to set up on your Linksys extender. Kindly follow the steps below to set up Linksys wifi extender using the web interface:

  1. To setup Linksys extender, plug the extender into the power outlet.
  2. Firstly, connect your smartphone to the Linksys range extender.
  3. After that, put down the default web address in your web browser and hit Enter.
  4. The Linksys extender login page will appear.
  5. The web browser will ask you to enter the username and password.
  6. Hit Enter and you will get inside the Linksys wifi extender web interface.
  7. After that, you will see the device searching for all the available networks around it.
  8. Finally, follow the on-screen instructions to setup Linksys extender.

Setup Linksys extender via the WPS method

This section will walk you through the steps to setup Linksys wifi extender using the WPS button. If you are unable to setup your Linksys wifi extender using, you can choose this method. Follow the steps below:

  1. Firstly, make sure the Linksys wifi extender is powered ON.
  2. Thereafter, locate the WPS button on your Linksys extender and press it.
  3. After that, press the WPS on your router, simultaneously.
  4. You need to hold both buttons until the devices pair with each other.
  5. The devices will connect to each other after a few minutes.
  6. AT last, you can also test the connectivity by going to the dead corners at your home. 

Linksys extender setup issues using

If you face any issues while attempting to configure your device using the default web address, please don’t worry! It is quite common to encounter the Linksys extender setup issues, which arise for a few reasons. Follow the steps below to fix the issues:

  1. You may want to follow the instructions given down if you are unable to perform the Linksys extender setup.
  2. Kindly don’t use the Linksys extender setup CD. 
  3. The setup will be done through
  4. Please ensure that your smartphone or computer is connected to the Linksys extender’s network. 
  5. Ensure adequate power supply to your extender.
  6. Make sure you are not connected to some other network or your smartphone’s Wifi hotspot.
  7. Cross-check the network name and network key while attempting to setup Linksys extender using

Common Linksys extender setup issues

In this section, we will discuss some of the most common issues that you might encounter while setting up your Linksys extender. Please follow to know about the issues for Linksys extender:

  1. Linksys extender setup page not responding or loading.
  2. The Linksys range extender won’t turn on.
  3. Issues while trying to set up your range extender.
  4. Unable to setup Linksys extender.
  5. The default web page not responding.

Is the Linksys extender setup not working?

Are you still unable to setup Linksys wifi extender using the default web address? Well, we can still resolve this out in a few minutes. The issues might be the fixable easily or may take a couple of minutes. So, just take a short time to read through the post and fix issues easily. In order to fix the issues you can follow the steps below:

  1. If the issue persists, you might want to reset the Linksys extender.
  2. You need to remember a few points before proceeding with the Linksys extender reset.
  3. Resetting your Linksys wifi extender will wipe off all the settings from your device.
  4. All wireless logs, passwords, and connected devices will also be erased.
  5. You will have to reconfigure your device after resetting it.

Why is Linksys Wifi Extender Keeps Disconnecting Frequently?

If you are facing issue with your Linksys extender that it is disconnecting frequently. It is known as intermittent error. Sometimes your Extender device drops but not regularly, that is not the intermittent error. That is called normal signal drop down.
There are may be some reasons for Linksys extender dropping internet connection. Here are some issues that can cause:
Wrong or Faulty firmware – Sometimes used updates the wrong firmware or they interrupt the correct firmware. The faulty firmware can reduce the performance score of your device. So, please ensure the firmware variant.

Instead of this, there are may be some issues that can interrupt your connection. In order to fix the issues you can check the connections. Still, having the issue? Just reset the device to its factory defaults.

How to Reset Linksys Extender?

Resetting of the device is the last process which is performed when all the other troubleshooting tips fail. If you have the same issue, just go through and perform the reset process to solve out the issue of Linksys extender drops connection. Make sure, you have taken the backup before performing the Linksys extender reset process.

  1. You will need a sharp object to push the reset button to reset Linksys extender to default factory settings.
  2. Firstly, press the button and hold it down for about 15 seconds.
  3. Your Linksys extender’s lights will flash for some time.
  4. After that, release the button and allow your extender to return to its default factory settings.
  5. The Linksys wifi extender will reboot on its own to make changes take place.
  6. Once your Linksys range extender restores the original settings, the issue will be resolved. 
  7. You can configure your device by following the aforementioned steps.

After performing the reset process, you can login to the device through the default username and password. After login, you can easily reconfigure the Linksys wifi extender easily within the couple of minutes.

Bottom line 

Setting up the Linksys range extender using the default web address is the most commonly used method. You get to choose a lot of options and features that can be enabled on your device for a better WiFi experience. In case you are unable to set up your device using the web interface, you can also use the WPS button to do the same. 

This post was all about how to setup Linksys extender using We hope that the aforementioned instructions helped you set up your range extender without any hassle. If you encounter more issues or problems with your Linksys extender, you can get in touch with our support team for further assistance. 



Please enter your comment!
Please enter your name here