Sometimes you encounter an issue related to your Linksys extender which you can’t pinpoint. It’s extremely disturbing when you can’t even figure out the root cause behind it. You may fail to find out the exact problem due to which your extender is freezing or is not responsive anymore. If such issues persist, you are free to reset Linksys wifi extender. This will return the device to its exact original state. While the reset function will eradicate all your saved settings, it’s worth knowing which reasons lead you to perform it in the first place. Know more about the Linksys Extender Reset Process as well as its possible causes and solutions in this blog.
Some troubleshooting tips for the Linksys extender before the reset
- Firstly, always connect Linksys Extender properly. For you, a loose wire lying on the floor may not be a concern, but that might be the exact reason why your extender failed to work properly. So just check that the wires and the cables connecting the devices are tight and damage-free.
- Try the Reboot process. It might seem simple but it has proved to be helpful and worth trying in many cases. A simple reboot is surely capable of enhancing your device’s activity in a long run.
- Always check the indicator lights of the extender. They show the live status of the device. If you ever notice any unusual behavior, call our team right away to mend the issue.
- Power cycle the range extender by disconnecting it from the power source. You can wait for a few minutes and plug it back again.
- Keep the extender’s firmware updated.
Why reset your Linksys Extender?
If you decide to Reset Linksys Wifi Extender, there can be numerous reasons behind your decision. Let us discuss some of them below:
- When the above-mentioned troubleshooting tips prove to be a failure.
- The range extender is continuously hanging and is not responding to the network signals.
- Your extender is slow in working.
- The range extender’s light is not solid or is not blinking even after the power cycle.
- You can not access the web-based GUI of the range extender.
- The reboot process failed as well to resolve your errors.
- You want to sell your extender.
- The password which you used while logging in to the extender is not traceable or you forgot it. The only option left here is to reset the extender.
- You no longer want to work with the saved settings and configure the wireless settings from the scratch.
- Even after updating the firmware, the device is giving errors and interruptions in its performance.
Before performing the reset
Just backup all the stored configurations or note down them somewhere. You can save the settings if you think that they might be useful in the future. Because, once the data is gone, you can no longer recover the settings and retrieve them back. For this click on the Restore Configurations button present under the Management sub-tab and then click Save Settings.
What is the reset process of the Linksys extender?
You can reset Linksys Wifi Extender using two primary ways. We will go through each of them in detail below.
This button is usually present at the back of the extender or on the side panel. The location may be different depending upon the model. Press the reset button on the range extender. Try to hold it for at least 8-10 seconds. The device will reboot and hence the reset process will be complete in no time.
Reset using the web-based facility
- Open any compatible browser on your device connected to the network. Now access the web-based setup page using any of the default gateways. Either the default IP address or the default web address can be used here.
- Choose Factory Defaults under Administration.
- You can then click on Restore Factory defaults
- Unplug the range extender from the power outlet and leave it OFF for 30 seconds to complete the process. You can plug in the device back now.
Conclusion
Want to know more about the Linksys Extender Reset Process and How to Setup Linksys Extender After Reset? Call our experts now and get in touch with them on the toll-free number.
