Topics:
1.Battery doesn't charge or drains too fast
2.Keyboard not working
3.Blue Screen of Death (BSOD)
4.Laptop refuses
Laptop are one of our most frequently use device so we make sure they run smoothly all the time. There is no way to be certain and sometimes things can go horribly wrong. Your laptop could be render useless by hardware failure or software problem. Most people instinctively take their laptop to a service center. Sometimes it is the best thing to do. But sometimes, you can fix your laptop repairing near me at home or find out why it isn’t working. First, diagnose the problem if you are having problems with your laptop. Let’s take a look at the most common issues people have with their laptops, along with the possible solutions. Let’s get on with it!
The battery won’t charge, or is too low in power, and will not recharge.
This is a common problem with laptops. It’s also quite simple. It is almost always the battery that causes the problem. You can check this out. You can first determine if your battery is dead by taking it out of the laptop and plugging it into the charger. If your laptop is still functioning normally, it’s likely that the battery is defective. If that happens, then you will need to purchase a new battery for the laptop model. The brand’s service department can be contacted.
It could be a problem with the charger. If your laptop won’t turn on after you have removed the battery and charged it, the charger may not be working properly. To be certain, you can try other wall outlets. If the laptop is not charging and the battery is still in it, you may need a new charger. It’s worth checking the software running behind the laptop to see if the battery is draining faster than expected. This can be check by going to Window ‘Setting.’ Then, select ‘System. Select ‘Battery Saver’ mode and then ‘Battery Use’. This will display a list of all apps that consume battery. Click on any unusual software to remove it from the list.
Keyboard not working
The laptop keyboard is prone to damage and can be the first to fail. You might lose the whole keyboard or, if you are lucky, only a few keys. If some keys stop working, it might be due to an obstruction. To check if dirt or dust is being remove from the laptop, turn it upside down and gently shake it. Although it might seem odd, it may work. You can first check for faulty keyboard driver if the problem is not with any keys. This can be done by opening the Device manager. You will need to re-download drivers if you see a yellow exclamation symbol next to the keyboard icon. Find the correct drivers for your keyboard on the download page of your laptop manufacturer. This may help to fix the problem. You can use a USB-powered keyboard in the interim.
Updating drivers
If updating drivers doesn’t solve the problem, it is possible that there is a loose connection between your keyboard unit and your motherboard. This is possible, but not always. To access all internals, you will need to remove the laptop chassis. Verify that the keyboard ribbon cable has been properly connect. If your laptop is older than 12 months, you should not attempt this. If your laptop is not in warranty, take it to the service center.
After all that is done, you may need to replace your keyboard. It is not as difficult as it sounds. It takes some research to open the laptop. Once you have the keyboard out, you need to make sure it is remove without damaging the inside of your laptop. The next step is to place the keyboard correctly and connect the keyboard ribbon cable.
Blue screen of Death (BSOD).
Blue Screen of Death, one of the most common problems with Windows laptops, is the most frightening. This error can be cause by a variety of factor. These error can be cause by both hardware and software problem. You might be able to restart your laptop in some case. In other case, it might not.
Verify for malware and corrupted drivers
You can start Windows again if you are able to boot into Windows. Before you run the scan, make sure to update it. Although it is rarely a problem, you can be certain.
You can also check for faulty drivers, and update them. This can be done by opening Device Manager. As we did with the keyboard, if there is a yellow exclamation beside any of your hardware components, you can update it by right-clicking on it and choosing ‘Update driver software’. Sometimes the issue you are experiencing might be caused by a new update. You can roll back an update to the older version if you are certain that a driver is causing the problem.
Overheating
A sudden crash can also be caused by an overheated processor or graphics chip. The heat generated by the laptop around the vents might help you determine this. SpeedFan is a Windows temperature monitoring program that you can download for free. It will allow you to see the temperature of your CPU and GPU.
The fan may not be working correctly or have been completely turned off, in which case the overheating might be caused by the fan. If your warranty covers your laptop, you should take it to a service center. You can also use the online guides to help you open your laptop carefully if you feel confident. Next, clean the fan and dust off. After this, assemble your laptop again.
Memory problems
Hardware failure can cause BSODs. The RAM is one component that can go wrong. You can check it in your laptop. To run the command, hold the Windows key + R keys on your laptop. Type’mdsched.exe into the command box and hit ‘OK. The window will open to check for memory problems. You will be asked to check for memory issues immediately or after switching on your laptop again. You can choose one depending on your preference.
If you decide to do it immediately, your laptop will run Windows Memory Diagnostics Tool to check for RAM issues. So RAM runs fine, there should not be any errors. If there are errors, you might need to have it replaced.
Hard drive failure
If everything is fine with RAM, then the hard drive should be check. Go to the File Explorer and check your RAM. Right-click on the drive that you wish to inspect and click on ‘Properties. Click on the ‘Check’ button in the window. You’ll be able to find the problem if the hard drive is the culprit. SpeedFan can be used to check for potential issues with your hard drive. If your hard drive is experiencing problems, you can take it to the service centre for laptop repair.
How to troubleshoot a PC Laptop That Won’t Turn On
There are several stages in which a PC laptop won’t turn on. If your laptop won’t turn on immediately, it is likely that you have a power supply problem. If your laptop seems dead, it is likely that you have a power supply problem. Here are some ways to troubleshoot.
Power sources
- Verify that your laptop is connected.
- Verify that the battery has been properly installed.
- To run your laptop using only the AC power, try removing the battery. If the battery works, it may be defective and needs to be replaced.
- You can use a second battery if you have one.
AC cord adapters
- Make sure you check the power brick located on the AC cord. Is this the right adapter? While other portable devices might have adapters that look similar, unless they match your laptop’s volts or amps, your laptop won’t work. This has never happened to me.
Make sure to inspect the lamps
- The laptop’s power lamp will turn on when it has enough life. This means that the laptop’s hardware recognizes that it has power. It could be that the problem is with the laptop’s hardware and not the power supply.
- You can test both the AC power and battery lamps on your laptop. It’s possible that the AC lamp is not lighting but the battery isn’t. If the AC lamp lights but the AC lamp doesn’t, it could be that the AC power brick is dead, or the AC power supply from the wall is faulty.
Test the hardware
- You can test hardware if you are technically competent. If your laptop has removable disk drive you should check that they are properly connect. Turn off the power and take the drives out. Then, put them back in. The same goes for the computer’s memory card. Turn off the laptop and remove the memory.
- Laptops won’t turn on if they aren’t working properly. I’m not being facetious. Laptop hardware can fail. Most laptop warranties cover the cost of replacing damaged electronics. Contact the laptop repair sharjah.
- The Cap Lock key is press. If the power is on, the Caps Lock lamp will turn on and off depending on whether you press the key. The problem may be with the display.
- The brightness setting of your laptop’s display should be check. The screen will appear dark if the brightness is too low, especially in bright rooms or under direct sunlight. To see if the screen glows, turn up the brightness.
- Connect an external monitor to the monitor port of your laptop. If the external monitor is working, it’s likely that the problem is only with the laptop’s screen, and not the adapter or any other internal hardware. The monitor and laptop are one thing so fixing the adapter or the monitor will require replacing major components. The laptop must be return to the dealer for repair.
Laptop won’t start
It can be hard to diagnose a problem with your laptop’s power supply or screen. There are several ways to determine the problem. It could be a problem with your charger or battery if your laptop is not turning on. To resolve this issue, follow the steps in the battery troubleshooting section earlier in the article.
The laptop powers on but does not display any display
The problem could be with the display. To check if your hard drive is active, you can watch the indicator lights on the hard disk. This could mean that Windows is trying to start up. If the indicator lights just keep on blinking, you can try pressing the Caps Lock button. If your laptop is not hung, the indicator light should turn on and off. It could indicate a hardware problem if the laptop locks up. In such cases, we recommend that you take your laptop to a service center.
Windows starts to boot but does not proceed
Windows may not complete booting if this happens. A Windows recovery disk is handy. Booting to the Recovery disk or USB drive may help repair the damage. You can also check if Windows starts by entering Safe Mode. This can be done by pressing F8 or Shift + F8 just before Window start to boot. You can then boot your laptop by inserting the pen drive or Recovery Disk into your laptop. This can be done by going into the BIOS and changing the Boot Disc Order. You can access the BIOS on most laptops and computers by pressing F2, F10, or Del keys. After that, you will be given the Window recovery disk tool. This disc can be use to repair, reset, or restore Windows installation.
Final step
A laptop can have many problems, some of which can occur simultaneously. These steps will help you diagnose some problems and get to the root of them. In some case, they can even be fix. There will be times when it is more difficult to find the problem. Do not panic in certain situations. You can always go to the service center of your laptop manufacturer for assistance. You can also approach ResQ at Reliance Digital in some cases. Even if your laptop is out of warranty, their qualified staff will assist you in fixing it.
