The range extender can be configured using the default gateway http://extender.linksys.com or the default IP address. You can access the wireless settings via this process and modify them according to your needs. Let’s learn more about accessing the extender in this blog.
Accessing the Linksys Extender setup via Extender.linksys.com
Plug the computer into the ethernet port of the range extender. Access the web-based setup page in the following situations:
- The extender was just dispatched and is still not configured.
- When the need arises to reset the extender or prefer to set it all up manually.
- Although your extender is set up, it’s not connected to the wireless router.
- Lastly, when you wish to review the settings. You can do so if you want to make any changes, you can do it.
Accessing the Linksys range extender
- Firstly, plug the Linksys range extender into the power outlet. Wait until the indicator lights stabilize.
- Use an Ethernet cable to connect the computer with the Linksys range extender’s ethernet port.
- You can open any compatible browser to enter the Linksys range extender’s IP address of 192.168.1.1. You can also use the default gateway http://extender.linksys.com.
- The username and password will be required. Leaving the Username field empty, enter the password in the given field. Click OK to log in. Enter the password you used to create your password previously.
Accessing an already configured extender
To access the web-based setup page for an extender already configured, you will need the IP address. Check the router’s DHCP Client Table to find the IP address of the range extender.
Configuration through Windows 10
- Firstly, click on the Start button and then click File Explorer.
- Click Network in the left pane.
- Right-click on the icon of the range extender and click View Device Website.
The range extender’s web page will then be displayed.
- The username and password will be required. Click OK or Login after entering the default details.
- Access the web-based setup page for the Linksys range extender.
Linksys Extender Setup for Windows 8/8.1
- To show the Charms bar, point your cursor at the top right corner of the screen and click Search.
- Enter Network in the search box. Click the Network app.
- Right-click on the icon of the extender and click Properties.
- Open any compatible browser.
- In the Address bar of the browser, enters the IP address of the range extender.
- Lastly, when asked for a Username, please leave it blank. Enter ‘admin” in the password field. Click OK to log in.
Accessing the Linksys setup :Windows 7/Vista
- Firstly, click the pearl button.
- Now enter Windows Explorer in the search box. Then click on the Windows Explorer app link from the search results.
- Click Network in the left pane.
- Right-click the icon of your extender and click properties. Note the IP address of your range extender.
- Open any compatible browser.
- Input the IP address. Input this in the address bar of the range extender.
- Enter your default credentials in these fields and click log in.
Linksys setup for Windows XP
- Click on the Start button.
- Now choose My Network Places.
- Right-click the icon of your extender and click properties. Note the IP address.
- Use any compatible browser to enter the default gateway.
- When the login page opens, enter your default login credentials. You can modify the details previously.
The web-based setup page is available now.
Mac OS X
- Open Safari’s web browser and bookmarks tab.
- Double-click Bonjour to select it.
- Lastly, enter the default login information. Click Log in.
Linksys Extender Setup :Troubleshooting
The working of the range extender can cause some issues. Follow the steps in each scenario.
Your range extender is not connected
You can connect to the range extender if you have trouble finding it.
- It is possible to need to position the range extender close to the router during the initial setup. Move to the final destination by unplugging the range extender.
- You can try different locations for both the router and extender to avoid signal interruptions.
- Keeping the router and extender away from electronics, metal products, and reflective surfaces is essential.
You cannot access your range extender
It would be best to connect to your extended network to begin the process.
- Firstly, select the wireless icon. It appears on the Windows desktop.
- Now, click on the extended name of the network once the list of available networks appears.
- Enter the password.
- You can proceed by clicking the OK button.
- The extended network will be shown on your computer. You can connect to the range extender’s setting interface.
-
You can press the reset button. Hold it for at least eight seconds. To complete the reset, power cycle your device. Although the exact location of the reset button will vary between models, it is usually located on the back or bottom
Resetting the Linksys range extender
Resetting the Linksys range extender will erase all the personalized settings and return it to factory default settings. Reset the Linksys range extender if you experience any of the following situations.
- Intermittent connections may occur when you use the range extender.
- The web-based setup page was failing to access.
- After a failed attempt to use the setup software, you manually install the range extender.
- After completing a power cycle, the range extender’s light does not flash or remain solid after being powered on.
Use the web-based setup page
Open any web browser you prefer, and then access the web-based setup page for the range extender. Select the factory defaults option under the administration tab. Click the button to restore the factory default. The last step is to unplug your range extender from the power socket and then put it in the power-off mode for approximately 30 seconds. After that, plug it into the device. Next, click the Restore configuration button under the Management tab and click the Save settings button.
Conclusion
Using these steps for Accessing the your Linksys extender and resolved your issues within no minute. Get in touch with our tech guys if you experience issues Linksys extender setup via http://extender.linksys.com.
website: https://www.postingtree.com/